Ireland and other countries that have hard water are using home water softeners as a standard home appliance. You will benefit from knowing how to operate it as it is a standard home appliance. This will save you the time of calling a professional to help with your softening device, read this.
The majority of home softening systems are similar in their operations and installation, with only minor differences. Most softeners will include a compartment for potassium, salt, or sodium. You will also find a brine, resin, main and bypass valves.
The main valve distributes softened waters throughout your plumbing system. A bypass is used to do maintenance work and prevent you from having to turn off your water supply. The brine tank houses the water that needs to be softened. The control panel for softening systems is also included.
The brine tank must be filled with water before you can use home water softeners. The size of your appliance will affect the amount of water that you use. For the recommended water level, refer to the manual. If you have lost your printed manual, you may search the retailer’s website for an online copy.
Next, choose whether you will soften your water with sodium or potassium. Sodium is less common and more expensive than potassium. People with high blood pressure or kidney disease, as well as people with heart conditions, should consider potassium to soften their water. For people with kidney disease or heart problems, too much salt or sodium can be harmful.
You should not use too much potassium if you choose to substitute salt. In your softening machine, only put one bag of potassium. Over-using potassium can make your water more difficult and cause a blockage in the softening process. You can use a stick to remove the bridge from the machine if this happens.
Next, you will need to access the control panel and change the date and the time. The machine will work faster if you set the right hardness level. A test kit can be purchased at hardware stores to test your water for hardness. You can increase the hardness by 5 for every 1 ppm iron content in your water.
You can also program the recharge time to run automatically. Your home water softeners can be set to automatically recharge during the night when no one is awake and likely to use water. For the unit to be fully charged, it needs to be left alone without hot water.