It’s possible you didn’t know imp source, but there are multiple methods to clean your carpets with your carpet cleaner. Carpets can be cleaned in two different ways: dry or wet. There are many people who want to understand the difference between cleaning carpets with wet or dry methods. It is more than just a matter of using more water. Vacuuming your carpet is recommended prior to using either method. The process is made easier.

Cleaning This is our very first technique. Most of the water used in cleaning is from wet methods. Steam cleaning, and shampooing, are the two main types.

With the shampooing method, you literally wash the carpet. A foam shampoo will be applied to the carpet by a cleaning machine. This procedure removes stains, and also stirs up the dirt. The shampoo becomes clogged with dirt as it is stirred. After drying the carpet, it can be vacuumed. Dirt and stains attached to carpet fibers are removed by using dried shampoo.

Steam cleaning could also be referred as wet-cleansing. When steam cleaning your carpet, the cleaner will spray on a hot mixture of detergent and water. It loosens dirt. A vacuum cleaner can then be used to remove any excess water.

Carpet Dry Cleaning Using a dry cleaning machine, a wet carpet powder is applied to the carpet. It is mostly made up of detergents as well as solvents that dissolve and absorbents. Add a little (just the right amount) of water to the powder and it will become moist. This powder has an incredibly strong chemical composition. The carpet will be vacuumed once the powder has been applied.

Dry Cleaning’s advantages and disadvantages It is classified “surface cleaning.” This is because it doesn’t clean as thoroughly. It is quicker. When using a solution to clean with, it can take 12 hours or more for the solution to dry. It takes a while to dry if you use a wet cleaner. The wet cleaning is more effective and thorough. Usually, the wait is worth it.

Cleaning Process The process described in the article is used by most professional cleaners. To begin with, they will survey the area in question to understand its layout and size as well as to identify the dirt and stains.

After vacuuming, remove all “easy-to-pick” dirt.

After vacuuming, a special solution is used to condition the carpet. It emulsifies biomaterials as well as dirt that have been suspended.

Then they agitate in the places where there are most people. It helps loosen dirt that has become compacted.

After agitation they rinse the cleaning solution that was applied in Step 3. After agitation is completed, the cleaning solutions used in Step 3 are rinsed. In the event that stubborn stains persist, stain-removing products are applied. To allow the spot removal agents time to work, spots are left in place for as much time as is necessary. The solution for spot removal is rinsed out of the carpet once the time period required to “dwell” has passed.

After the carpets are cleaned, Dupont Teflon Advanced Fiber Protectant is applied. It is recommended that you complete this step, even though it is not required.
NAP:
Spotless Carpet Cleaning North Shore
1-5 Lynbara Ave, St Ives NSW 2075
(02) 8607 8811